Qi Wireless Charger & Mount - Qi Wireless Car Charger combines an air vent phone mount holder and a wireless charger into one. To Using GPS navigation while driving, it is easy to hold your phone. Our Qi car charger has a built-in intelligent chip with multiple protections such as overcharge, overcurrent, short circuit, temperature control, etc
Auto-Clamping Arms - The automatic-clamping feature enables you to mount or retrieve your phone with one hand motion. Just touch the sensing area and the arms would automatically open and you take the phone out, Once the phone is in the arms will automatically close to secure your phone
360° Rotating Car Phone Mount - 360° rotating ball helps you to find the most suitable angle for safe driving. Put the phone close to the bracket, the infrared sensor at the bottom will release the clips automatically and clamp the phone tightly. Touch the top sensing area softly, the clips will be released automatically, then get the phone
No Remove Phone Case - If your phone case thickness is not more than 0.2 inch, No need to remove phone case (most of phone cases in the market except rugged, uneven case.)while charging.The car holder can hold all phones with a width of 2.36-3.15 inch tightly, which works very well for all QI-enabled phones
What Your Get - 1 * Wireless car charger mount, 1 * USB QC 3.0 car charger, 1 * Air vent clip, 1 * Type C cable, 1* User Manual
FAST WIRELESS CHARGING UP TO 10W-10W fast charging for Galaxy Note10+/Note 10/S10+/S10/Note 9/S9+/S9/S8+/S8/Note 8/S7 edge+/S7/S6 edge+/S6 edge/S6+/S6/Note 5; 7. 5W fast charging for iPhone 11 Pro Max/11 Pro/11/XS Max/XS/x/XR/8/8 Plus (10W/7. 5W fast charging requires a QC2. 0/3. 0 adapter); 5W standard wireless charging for other Qi-enabled Phones (5V/2A adapter is required) The adjustable support Foot helps align different sizes of phones for efficient wireless charging., AUTO-CLAMPING ARMS-The automatic-clamping feature enables you to mount or retrieve your phone with one hand motion. Just tap one of the two release buttons on the side to open the arms automatically（NOTE: when the power is connected） once the phone is in the arms will automatically close to secure your phone. The built-in energy storage setting allows you to open the arms to take your phone out within 10s-20s even after the power supply is disconnected or your car is stalled., TWO INSTALLATION METHODS-The car mount can be installed on the vehicle’s dashboard And air vent with the included suction cup base and air vent clip. The strong suction cup base with sticky gel and anti-shake stabilizer keeps the mount securely on the dashboard without wobbling., FLEXIBLE AND LONG GOOSENECK-Unlike the conventional stand-up dashboard car mount This innovative mount lies on the dashboard without blocking your line of sight. The 15cm/5 9in aluminum gooseneck brings your phone closer to you for better and easier access to your phone’s functions. What makes us unique is that the sturdy yet flexible gooseneck can be bent to avoid obstructing the display and irregular vents., QI STANDARD AND FOD FUNCTION-The Qi wireless charging technology and large coil maximize the charging output and efficiency making charging faster than standard wireless chargers. The built-in intelligent chip provides over-charge/temperature/voltage/current protection to safeguard devices and users With FOD (foreign object detection) and smart LED indicator. The red light indicates that it is charging normally while a flashing red means it is not working properly.
Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power., 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging., Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices., Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed., This car phone mount holder is compatible with most all cell phone devices
👍MORE STABILITY, LESS BLOCKING: This will be the most no blocking and stable car phone holder mount solution. Lisen brand laboratory has upgraded the product from 3 directions. Upgrade curved arm to protect your phone from hot and cold wind from the air vent; the most stable hook-shaped clip; thickened high-quality [Titanium Magnet] Strong Magnetic, everything is just right. Iphone12 magsafe is not supported., 👍NEVER BLOCK VENT & DRIVING SIGHT: Lisen phone holder for car vent unique 72.4mm curved arm will giving you the best no block vent and safest driving vision. You can 360° swivel and tilt the phone freely to avoid blocking the vent, dashboard and front line of sight, defeat sun glare. It will be a perfect partner for you and your family to drive safely., 👍NEVER DROPPING FROM VENT: The next level of phone magnet car mount is equipped with the most stable hook-shaped clip. Upgraded groove and hook will firmly lock the vent, which really basically solves the problem of the car vent phone mount drop from the vent., 👍THICKER AND HIGH-QUALITY MAGNETS: LISEN Magnetic Holder mount Handy Auto Magnetic Test 8LB corresponds approximately to the weight of 19 iPhone12. Thanks to the strong suction, your phone remains stable even on bumpy roads. PLEASE NOTE: It is recommended to use the "square pad" on the back of your phone/case. It's more stable than the round., ❤️WHAT'S YOU GET❤️: 1*LISEN car phone holder mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film, 1*Rectangular PE Film. NOTE: THIS CAR PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.
【Save 9000S in 1 Year】The memory structure of this car phone mount allow you 0.5s slide In & Out your phone.It's easy to slide the phone in/out once set the mount width to fit your phone size, no longer requires open and squeeze clamp arms every time, super easy and fast to take phone out and put it back in., 【Firm & Secure Phone Holder】The quadrilateral clamp arms of this car phone holder steadily embrace phone from 4 points, prevent your phone from tilting or falling.VANMASS applies highest standards at every level, provide 2 clips to meet the needs of horizontal/vertical vents, Patented steel core chuck & silicone design allows air vent phone holder firmly attach on air vent outlet., 【Adjustable Viewing Angle】360 Degree Rotation car bracket support you freely to rotate the angle of the phone holder according to the position of the air vent, to ensure that it can make your eyes more comfortable and the screen more complete, and to ensure that your driving is more convenient while driving to avoid potential hazards., 【Broad Compatibility】 [This cell phone car mount works wonderfully with a slim case. NOT fit for a thick case such as OtterBox and wallet cases] Designed with one-button released function, the width of holder can be flexibly adjusted to hold phones of size from 4.7 to 6.5inches iPhone SE/9/11Pro Max / 11 Pro/11/XS MAX/XS/XR/X/8/8 Plus/7/7 Plus/6s/6 Plus. Also compatible with Samsung Galaxy/Note 10/Note 10+/S20/S20 Plus/S10/S10e/S10+ / S9 /S8/S /LG Google etc., 【Package Content】This car phone holder comes with car phone mount cradle, twist-Lock clip, 3-Level Lock clip, User's Guide.
Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car, Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents, Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view, Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches, Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual
STRONG MAGNETIC FORCE - Contains 4 N45 magnets(15% stronger than the market-average N35 magnet), strong enough to hold 2 iPhone 8 at the same time. Please attach the metal plate directly on the back of your cellphone case to gain the most powerful magnetism. (NOTE: For direct mounting of metal plates onto your smartphone, use the included protection film BEFORE attaching the metal plate., Strongest VHB Adhesive - The Innovative Car Phone Mount with 3M Adhesive mounting base is strong enough for even the roughest roads, It guarantees that the mounting base will firmly hold the powerful magnets mount head, to keep your smartphone in place, even when in a heavy case., MORE USAGE SCENARIOS - In addition to providing convenience for your driving, it can also bring more convenience to your life. Whether you're in your car, kitchen, office or bedroom, enjoy a hands-free experience with your smartphone. (Compatible with all smartphones: iPhone 11 Pro Max,XR XS Max X, iPhone 8/7 Plus/8/7/6/6 Plus, Galaxy S10/S10+/S10e/ S9/S9 Plus/S8/S8 Plus/S7/S7 Edge/Note 9 8, LG G7 G6, Pixel/2, Pixel XL/2 XL, HTC, Xperia, Nokia, Nexus), Easy to Install - No tools necessary for this installation! Simply peel back the adhesive and stick the Mount to any surface. Also, includes metal plates for your phone. Either attach the metal plates directly onto your phone or simply insert it between your phone and phone case. (NOTE 1: Metal plates will interfere with wireless charging capabilities. Remove the plate before using a wireless charge.), Excellent Compatibility with Small Stature - is made of permanent neodymium magnets, solid alloy body and liquid silicone interface,The mini size of the holder can save the space and will not block your sight. Best quality for your car.
【3 in 1 Wireless Charging pad】 The ELE-Jiaruila wireless charger station charges your phone, iWatch and AirPods simultaneously. The apple watch charger stand Compatible iWatch 5/4/3/2, airpod pro charging station providing you with a cool exterior ; please note: 1. 7. 5W fast charging needs QC3. 0 adapter ( INCLUDED); 2. ORIGINAL Apple Watch Magnetic Charger is required (NOT INCLUDED)., 【High Quality & Safety】 Using advanced charging components, the charging speed(with 18W QC3.0 adapter) is 20% faster than ordinary wireless charging. This wireless charging stand is Qi/FCC/CE certified, exclusive Multifunctional Intelligent Protect Technology provides temperature control, surge protection, short-circuit prevention and more., 【Case-Friendly & Cable Storage 】: Charges through most phone cases up to 6mm/0. 22in thick,no need to remove the slim case from your phone. Please note that cases made of metal, external attachments such as magnets, credit cards, grips, and stands will interfere with charging; The charging dock hides the cables of iWatch inside nicely, saving your space on your desk. Never have a mess at your desk again., 【Widely Compatibility】 Not only supports Apple devices, but also the Android Qi wireless charging devices of your friends. Support iPhone 11/11 Pro/11 Pro Max/X/Xs/Xs Max/XR/8/8 Plus, Apple Watch 1/2/3/4/5, AirPods 2/AirPods Pro; Samsung Galaxy S20/S20+/S10/S10+/S9+/S9, Note 10/9/8, Samsung Galaxy Buds, and other Qi-enabled devices, 【What You Get】 1 * Wireless Charger Pad, 1 * USB-C Charging Cable, 1* QC3.0 Adapter, 1 * User Manual,(NOT include iWatch charging cable). ELE-Jiaruila Smile Service: 12 hours email reply, 60 days worry-free return and exchange, 365 days customer support.
🎁[Unique Air Vent Car Phone Holder]:ANDOLO car phone holder with 2 upgraded mount clips [stronger & tighter],this cell phone holder for car is made with the environmentally friendly PC material, no peculiar smell, and adopts the most stable triangle structure,your cell phone can't drop even if in speed bumps/rough roads/brake sudden etc., 🎁[One-Handed Simple Operation]ANDOLO chief engineer break the customary rules and make cell phone holders for car stand out from the rest, designed distinctive release buttons on both sides,when you press one of these buttons, the clamp arm will release (0.1s) quickly, give you one more simple and convenient operation experience., 🎁[Multiple Viewing Angle And Adjustable Foot]Universal ball head size,360 degrees rotating and pivoting ball joint gives you the perfect viewing angle.The bottom foot is adjustable,precise distance design, accurate to prevent your phone's voice or power button from being clamped;you can adjust phone holder to any angle that suits you to ensure give you a comfortable and safe driving experience., 🎁[Compatible With 99% Air Vents And Phones]ANDOLO Cell Phone Automobile Cradles with 2 different clips,the extremely flexible air vent clip fits any car with horizontal & vertical vent blades, and never harms and downs of your air vent . The 3-level air vent clip works well for Large Phones with Thick Cases. The upgraded Adjustable twist-lock air vent clip works well for any size air vent.and phone holder works well for almost phones, such as iPhone 12/12 Pro Samsung Note 20., 🎁[Soft And Friendly Material]The inner side of the arm and the adjustable footare covered with a layer of soft silicone, which gently wraps your mobile phone without scratching your beloved mobile phone or phone case. The outer side of the arm is designed with fingerprint film, so you can easily Find and press the clamp arm, and the fingers will not slip, ANDOLO car phone mount is designed only for you!
【PD Adapter Included】: A 20W USB C power adapter provides fast charging with either MagSafe chargers or USB C to Lightning cables, and all in a compact form – the same size as Apple’s 5W adapter. (Note：1.USB C to Lightning cable sold separately. 2. MagSafe charger can't provide up to 20W charging, to charge at 20W, please use the 20W PD USB C charger with the charging cable.), 【Magnetic Alignment】: New MagSafe technology perfectly snaps and centers to the charging coil on the back of the iPhone 12, iPhone 12 Pro, iPhone 12 mini and iPhone 12 Pro Max for secure wireless charging., 【Through-Case Charging with MagSafe】: Suitable for use with Apple’s MagSafe cases; if your phone case isn’t made with MagSafe, please remove it for charging, 【Sleek & Compact】: Measures 62mm x 6.1mm and crafted with a lightweight aluminum base, this puck-sized charging pad sticks firmly to the back of your iPhone 12 and easily slips into your pocket, 【Stay Safe & Cool】: Keep the charger and your device cool and intact while charging with overheating/ overcurrent/ overvoltage protection, 【What You Get】: 1 x RAVPower Magnetic Wireless Charger, 1 x 20W USB-C PD Adapter, 1 x User Guide
DealDump.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.